Most bar stools require that you bolt them down to the floors. They are not designed to move around as is the case with most other kitchen furniture. Each of these stools has some slots in which may drive the bolts and tighten appropriately to make the structure largely intact.
Knowing how to go about the matter is definitely a noble thing to do. We are here to help you to get started out in this. That stems from our realization that many people simply do not have the skills and the expertise they need to accomplish this noble aim.
How to Bolt Down Bar Stools to Floor?
Tools and Materials Required
Before you start the exercise, you have to gather these essentials below:
- Spanner or wrench
- Tape measure
- Drilling machine
- Apron or overall
Having gathered every essential you need, you now have to follow the steps below to actualize these procedures:
Step I: Put on the necessary protective attire
As always, you have to put on the necessary protective attire. An apron is to be used to secure your body from all forms of dirt and other contaminants that may be leveled against it. The cap or helmet is to shield your head from the falling debris and the possibilities of concussions.
The pair of gloves on the other hand will protect your delicate handles from blisters and abrasions that may arise in the course of working. Lastly, you may have to put on a pair of goggles for the sake of shielding your eyes from the dangers that may inflict it as a result of the falling debris.
Step II: Prep the work area
Move ahead now to prep the work area. This basically entails making the area safer for your work and other actions. Doing this may entail the employment of various strategies. These include lighting the area sufficiently with the necessary amount of lighting. The same goes for the ventilation thereof.
Be sure that there is a sufficient amount of fresh air trickling in the room or place where you have to operate in. You do not want to suffocate or encounter serious respiratory issues as you move along. Then, encircle the area with a strip to keep off intruders from getting in.
Step III: Mark out the dimensions of the stool
Let’s get to the stool now. Mark out its dimensions appropriately. While at it, know precisely where exactly the four feet shall stand. Do this by placing the stools on the floor, using the tape measure to mark out the dimensions, and then chalk to draw the same on the floor.
Step IV: Drill holes on the floor
Proceed now to drill holes on the floor in the precise areas where you have already marked the holes. Use a drilling machine to do this work. Be slow and meticulous as you do this. Remember not to make the holes too deep as this may be difficult to fill at a later date.
From time to time, try and insert the stools in these holes to find out whether they indeed tally or not. You might have to widen or deepen the holes to be able to fit the legs of the stools perfectly. Obviously, this will require a great deal of patience and long-suffering from you.
Step V: Position the stool strategically
Get down now to the business of positioning the stool strategically. Do this by inserting the stool in the holes you have already drilled. Make sure that the legs of the stools fit the holes perfectly. Then, insert the bolts in the holes and through the legs of the tool.
Use a spanner or a wrench to tighten these holes. Be slow yet again as you do this. You do not want to inflict any severe damages to the floors in the course of doing that, do you? As you do so, shake the stool slightly to see whether you might need any further corrections or not.
Step VI: Test the work
After you are done with the fixing or installation, you now need to test the system to find out whether it is indeed foolproof or not. Do shake it a little here and there to do this. In case the stool is fidgety, you might have to tighten the bolts a little further.
If however, the hole is too wide, you may have to fill the superfluous spaces using some cement or caulk. Leave the same to dry out before proceeding to tighten the seats further. You are now good to go from this point onwards.
Some tips below will help you to do a great job, overall:
Beware of Prickles
It is not uncommon for the hands and other vital organs of the body to be prickled at this time. Beware of the same as you go about the business of bolting your stools to the floor. You want to prevent your delicate skin and body from sustaining untold injuries and the possibilities of bleeding.
Work in the light
Always, it is necessary for you to work in the light. Only a properly lit environment may guarantee the kind of precision and comfort you badly need. If there is no light in existence, you may need to bring in one for yourself here.
The task of bolting down the bar stools to the floor is not for the faint-hearted. It is something that requires a fairly high degree of expertise and carefulness. As a plausible way forward, we recommend that you go through the steps above slowly and meticulously.
Perhaps the best way to go is to carry out mock installation procedures from time to time. Take the time to spot the mistakes you may make in the course of doing that and vary them appropriately. Thereafter, translate the same to your installation procedures and tricks. Is it too much to ask you to fix yours at the moment?