The chrome plating gives the bar stools the beauty and the aesthetics they ought to have. Not only are they shiny but also fair to behold with the naked eyes. Nonetheless, they are also susceptible to the risks of rust, corrosion, and dullness. If and when that happens, their aesthetics is greatly compromised.
To remedy this, you have to know how to clean and restore the chrome to their original conditions. For this to happen, you have to receive the necessary guidance and expertise. We prepare and showcase these steps in the following article. It is our hope that you shall find the inspiration you badly need.
How to Clean Chrome on Bar Stools?
Tools and Materials Required
Even before you embark on the task of cleaning the chrome, you have to garner the tools and the materials you will employ for the same. Below are they:
- WD-40 or baby Oil
- Alcohol
- Cloth
- Aluminum foil
- Furniture polish
- Vinegar
- Warm water
- Soap or mild detergent
- Aprons or overalls
- Gloves
- Face mask
Step-by-step Procedures
Now follow the procedures stipulated below to accomplish this aim:
Step I: Put on the necessary protective gears
Start it out by putting on the necessary protective gear for the job. The apron will shield your body and the clothes from getting soiled with the dirty water. A pair of gloves will safeguard your fingers and delicate hands from the harms that may potentially arise while the facemask will prevent you from inhaling harmful gases.
Follow this up by cordoning the area you intend to clean the stool in. Use tape to surround this area to keep others from intruding. Particularly, keep the small children as far away from the venue as can be. Let them not even come close to the place as they may interfere with your work.
Step II: Straighten any dents
Chances are that your chrome plating has some pre-existing dents. At no other time might you fix these dents better than at this stage. Use a set of pliers to straighten the crooked edges and other portions of the chrome plating. Be slow and cautious as you do this to prevent inflicting further damages.
If in doubt, bring in an expert to help you out. Let the said technician employ his skill and technical expertise to reverse the menace. Other than the chrome plating itself, you may also have to fix other issues that exist on the stool at that time.
Step III: Wipe the chrome plating
Kick start the exercise by wiping the chrome plating. Use some warm and soapy water to do this. Apply some soap on a clean cloth and dip the same in warm water. Then, squeeze out all the water and the detergent from the piece of cloth.
Proceed then to wipe off the dirt from the chrome plating. Pay keener attention to the crevices as they are the ones that harbor much of the dirt and dust. You are advised to do this on a daily basis to prevent the buildup of dirt and dust. Be sure to wipe off all the residual moisture after you are done.
Step IV: Eliminate the rust
With all the dirt and dust gone, you now have to eliminate the rust. This one will require the use of Aluminum foil. Turn the Aluminum foil’s shiny side up and crumple it to a ball. Then, dip it in water. After that, rub it against the chrome plating to remove the rust from off the surface.
In case the rust persists, you may have to bring in the vinegar and the alcohol. They have the ability to brighten the surfaces by way of making the same to sparkle and shine after application. As always, use a clean piece of cloth to clear all the wet residues left behind.
Step V: Polish the plating
Round it up by polishing the chrome plating. The aim of this step is to give the plating a lovely and highly shiny appearance that also imbues the reflective look. A microfiber or cotton cloth will do this job perfectly well. You will have to supplement it with the furnish polish, WD-40, or the baby oil.
Apply either of the above products on the clean piece of cloth and rub the same onto the surface. Pass the cloth severally atop the chrome surface to eliminate the residual dirt and to leave behind a shinier appearance. Do so severally until the chrome has attained a beautiful shine.
Safety Tips
Below are some of the tips you might want to adhere to while cleaning your stools:
Ventilate the Area
Be sure to make the area appropriately ventilated. This is to allow for the smoother passage and distribution of the gas wastes that may arise in the course of cleaning your stools. If possible, work out in the open to prevent any of the emergent issues.
Light up the Area
If you happen to be working inside the room, ensure that it is well lit. Make appropriate arrangements to furnish the area with sufficient lighting. You may do this by use of a bulb or any other artificial form of lighting. The object of this is to let you behold what you are doing clearly.
Work slow and steadily
You are advised to work slowly and steadily to tackle the chore you have. It is only by a slow and steady approach that you may do a thorough job on the whole. Rushing too much may only cause you to ruin or even pose some damages to the stool altogether.
Conclusion
From the discussions above, one thing clearly stands out: that eliminating dirt from the chrome on the bar stools is not really a daunting task. It is something that just about anyone can do with much ease. With that in mind, what now are you waiting for?
Is it not ripe for you now to move with haste and implement the guidance we have generously given out? Remember, it pays to seek the intervention of a trained expert just in case you are not sure of yourself. When do you plan to set out for cleaning the chrome on your bar stool? Let us know in the comments section below…
